Themed Wall Colors

May 28, 2009 by Decorator  
Filed under Interior Design



A lot of planning has to be done for deciding the colors of wall paints in the living rooms and kitchen. The furniture and the mats used in the rooms should be compatible with the wall painting.  

The house owner who has painting as his hobby can paint the walls of his rooms. He can browse the internet to get good information for building and testing color combinations. Some sites give ideas to develop harmony in color combinations. Though choice of color schemes is dependent on him, certain optical illusions can be displayed by using variety of colors. A small room painted in white gives an enlarged look. The white wall reflects sunlight on to the different colored walls. Even the dark corners are brightened by the presence of white walls. 

He can paint the walls of his kitchen in bright orange, red or light green. Paints with pastel shades create moods of relaxation and are suitable for bedrooms and toilets. Painting the ceilings with light colors give a heightened look for the ceilings while dark shades lower their heights.

Light intensity plays a major role in the looks of the room. As the light intensity increases, the bright wall colors look even brighter whereas wallpapers with dark designs create an atmosphere of enclosure and depression.

The house owner should match the color and design of the furniture to the paint on the walls. He can purchase matching Axminster carpets to floor the rooms. The interior decoration demonstrates the theme of the house owner.

Usage Of Appropriate Tools In Glass Fixing

May 20, 2009 by Decorator  
Filed under Remodeling

When strong winds blow, the window shutters escape from the latches and swing violently resulting in breaking of the glass panes. These glass pieces have to be removed using gloves, without cutting the fingers.


window-glass-pane.jpg

The old putty holding the glass pieces to the window shutter is removed softly using hacking knife or chisel and mallet. The nails which hold the glass to the rebate are pulled out using the pliers.

The old putty sticking the glass to the wooden frame is slowly chipped off with a chisel and the glass pieces are removed applying leverage. The woodwork is protected from damage during these operations.

After removing all the broken glass pieces sticking to the frame, the rebate is thoroughly cleaned and a coat of wood primer is applied. New glass which is cut to dimensions slightly lesser than the rebate is made ready for replacement. Linseed oil putty is thoroughly kneaded with fingers until the paste is consistent and pliable.

The putty is applied and skimmed on to the rebate to form a thick layer for one side of the new glass pane to stick.

The new glass pane is fixed to the window shutter by pressing it on the putty. The headless nails are tapped with gaps of around 5″ on the rebate to hold the glass pane firmly to the shutter. The surplus putty popping out of the rebate is trimmed off with putty knife.

The gap between the edge of the glass and the frame is filled with additional putty and the blade is moved downwards in an angle with the glass. The protruded putty is scraped out using knife at the corners. The horizontal edge of the putty has to be trimmed to make it act as a watershed.

After the putty has dried, a coating of wood primer is given to the window frame and followed by the paint. Good quality latches are fixed to the window frame to prevent breaking of the glass due to the winds.

Technology In Your Counterpart

May 15, 2009 by Decorator  
Filed under Kitchen

When you choose material for your kitchen countertops,price,appearance and future use have to considered as starting points to make your selection.

kitchen countertopsPrices variation begins from$10 per square foot,rise  $100 or more.Knowing your budget will guide you to select material and design.

Start with laminate material. Its prices start around $10 -50 per square foot.

Advantages: easy to install.

Disadvantages: don’t resist scratches, turn old quickly but they are easily replaced.

Textures and colors offers great variety and have a more than satisfying stain resistance. When they are laid down over plywood, it would take a couple of days to replace. Maybe scraping glue off during hours is very hard and replace the entire plywood plank will be easier.

In the economical line, ceramic tile is widely popular. A few dollar per square foot is the price of some tiles, but depending from the quality, it can reach to $50 per tile.

Advantages: easy to install.

Disadvantages:
hard to repair and replace. Strongly bonded to the surfaced where they have been glued, replacing them is quiet difficult: you must gouging out the grout and then pry up the old tile.

Ceramic tiles have a problem with grout: difficult of cleaning. Tiles are durable but once cracked, many times they are left as they are and after a time, the surface looks very old and shoddy

Styled concrete

A new product, is installed for $50 per square foot, durable and resistant, with good colors, is a good options

Due to its characteristics, concrete tiles is left to professionals.Stainless steel : traditional and always in  vogue, its cost is around $50-$65 per square foot,an affordable price, easy to clean,durable but can turn splotchy over time

Expensive material

Marble. Traditional and stylish, its prices round the $ 75 per square foot. Durable over the time, it will have a great appearance always.Regular re-sealing to tamp its porous surface is required to avoid discoloring and stains, you can choose from a very wide range of marble types and colors.

Granite

The best material for countertop surface,its price start at $80 and rise beyond that very quickly- Highly resistance,stainless when properly sealed,granite is one of the favorite. Its installation must be done by professionals.

Technology In Your Counterpart

Engineered stone is the novelty blending the best of two worlds: old fashionable looks and 21th century technology-Its prices start at $ 50 and keeps moderately high. Any stone pattern can be reproduced while surfaces can be made exclusive. No sealing, stain and scratches resistant is a good option and rarely present heat problems.Professional installation is current for this material but you can do it by yourself if you are enough skilled in this things

You have now a list of the most current materials,and it is time to choose from them the most suitable for your kitchen style : kitchen counterparts are an important part of your every day life